I own a raspberry pi 4. Every time I try to use it, I spend half my time trying to fix the stuttery/non responsive UI by fucking with the compistor and such. And then I give up.

I eventually got a new gaming PC and turned my old one into a Linux server, and haven't really touched my Raspberry Pi since.

RPI4/400 is perfectly capable as a little home server. All it needs is a good SD card.

Owntracks,photoprism,monocker,brave go m-sync,libre photos,wallabag,radicals e,Baikal,Firefox sync,Joplin web,webdav server,jellyfin,vaultwarden,wireguard

This lemmy instance is running on my Pi

Lets see...

• nord vpn client
• qbittorrent (through nord vpn)
• proxy server (through nord vpn)
• wireguard vpn server
• ssh client so I can port forward through the vpn server to/from connected clients
• jellyfin
• ntfy (self hosted notifications)
• pi-hole (vital for the local dns)
• nginx
• gitea
• wallabag
• minecraft server
• container registery
• smb share for my friend (I help them with content creation)
• smb share for a live recording profile I set up on android

Those are just docker containers, it also is a backup server for all the devices I own. It also runs all non sensitive data on an unencrypted partition then will auto decrypt the sensitive partion through ssh via my desktop. This means my vpn server will always run so I can connect, wake on lan my desktop, decrypt it and log in. Im sure I'm missing things.

It runs the KBin instance I'm using to reply to you :)

Also Adguard home.

I have one pi (rpi 4b) that I still use. I have it in an Argon One V2 case for the daughter board that lets me boot from an M.2 SATA SSD. I got tired of the corrupted SD cards. It’s actually reliable now.

Anyway, I mainly only use it because in the event of a power outage, as soon as power is restored, it automatically turns on. If I’m not home, I can SSH back into my network and send a WoL packet to my actual server to turn it back on.

The pi also runs:

• Scrypted so I can view my ring cameras in the Apple Home app and so I get the “someone is at the door” notifications on my Apple TV
• Pi-Hole
• Pi-VPN

I feel old, I don't understand 90% of words in this thread lol.

I just have kodi on Libreelec with a jellyfin plugin on my rpi4 and even that struggled with overheating at times. So I run most stuff on my pc instead. I'm tempted to try the portainer to get some experience with docker tho.

I have a Pi4 running octoprint, pi-hole and some of my own containers.

The rest I run on a Hetzner VM.

Cluster of Pi4 8GBs. Bought pre-pandemic; love the little things.

Nomad, Consul, Gluster, w/ TrueNas-backed NFS for the big files.

They do all sorts of nifty things for us including Nightscout, LanguageTool OSS, monitoring for ubiquiti, Nextdrive, Grafana (which I use for home monitoring - temps/humidity with alerts), Prometheus & Mimir, Postgres, Codeserver.

Basically I use them to schedule dockerized services I want to run or am interested in playing with/learning.

Also I use Rapsberry Pi zero 2 w’s with Shairport-sync (https://github.com/mikebrady/shairport-sync ) as Airplay 2 streaming bridges for audio equipment that isn’t networked or doesn’t support AirPlay 2.

I’m not sure I’d buy a Pi4 today; but they’ve been great so far.

I have 6 4b's running PiCorePlayer for home audio. I control them with LMS and can sync them or play different things in different rooms.

Yes, it's probably pretty demanding of the hardware but my Pi4 4GB runs:

• Heimdall
• Portainer
• Vaultwarden
• Flatnotes
• ownCloud
• FreshRSS
• Paperless

RPi 4B > DietPi > Pi hole + Unbound.

Yeah but they’re really only good for single purpose things I keep killing sd cards trying to do more.

Octopi

I used to run pretty much all my workloads on Raspberry Pis, mostly in docker containers. I've since moved over to some ex enterprise servers and Proxmox, so I really only have a couple of Pis left in service, running:

• Frigate: nvr for my IP cameras
• exim: mail relay server for my stuff to be able to email out (nothing in)
• Wireguard: outbound VPN server connected to Mullvad
• Pi-hole: 2nd instance for redundancy, also runs cloudflared (for DNSoHTTP) and pihole-exporter (for putting Pi-hole stats into Prometheus)
• Mosquitto: because I haven't moved it yet
• Prometheus: ditto

Home security system, VPN, DNS server with pihole.

I wanted to reuse one for octoprint, but it turned out to be unreliable. So I switched to my NUC instead.

I have the feeking that those SD cards just don't perform well and wear out more easily, and I really use good ones.

I use mine as a minimalistic NAS and media server

pihole and an always-on syncthing node.

I run PiHole on mine

I use it as a media remote for my computer via infrared. IR sensor sends analog data to an arduino which converts it to digital and sends it to a raspberry pi which then invokes commands to control media on my computer by invoking rest apis on a “unified remote” server running on the computer.

I used to run everything with Pis, but then got a x86 USFF to improve Nextcloud performance.

With the energy price madness last year in Europe, I moved most things to cloud VPSs.

One Pi is still running Home Assistant, hooked to my heating/ventilation unit via RS485/modbus.

I had a ZFS backup server with 2 HDDs hooked up over USB to a Pi 8GB. That is just way too unreliable for anything serious, I think I now have a lot of corrupted files in the backups. Looking into getting some Synology unit for that.

For anything serious that requires file storage, I'd steer clear from USB or SD cards. After getting used to SATA performance, it's hard to go back anyways. I'd really like to use the Pis, but family photo backups turning gray due to bitflips is unacceptable.

They are a great entrypoint to self-hosting and the Linux world though!

I have 2 Pi 4s in operation. One is a Moonlight/USBoverIP stream gaming portal. It automatically turns on and connects to a VM running Sunshine on my Proxmox host, passes any USB controllers/bluetooth etc to the VM so the big loud gaming box is in the basement and the tiny Pi is next to the TV. 1080p60 works great, minimal lag.

The other acts mostly as a quorum server for the proxmox servers, I have two proxmox hosts and use the second Pi to ensure the cluster doesn’t get split brain. It also acts as a USBoverIP host for my home automation Zigbee and Zwave usb sticks, so that either proxmox host can connect to the USB sticks and the home automation VMs aren’t locked to a physical host.

I'm using my RPi4 4gb to run a home media server, jellyfin and *arr stack all containerized and automated. Also syncthing for obsidian. Works perfectly

I have a pi 3 running my primary instance of Adguard Home, a pi 4 I don't know yet what to do with, and a Pi B that has RISCOS on it for fun. Seriously, if you ever just want to poke around a unique OS, download the official RISCOS image in the Raspberry Pi imager. Any UK folks reading this know what I'm talking about. But as an American I'd never heard of it and it's just friggin' neat!

Using Pi's to run services in my homelab which I want to keep separate from my server (to have some sort of failover in case the server goes down). Status/Monitoring, VPN server and so on

One 3B+ runs my network services - things I need to stay up if I restart the production server. Another one has a specialist role - IP gateway into the ham radio AllstarLink network - connected to a 70cm radio with a modified USB sound dongle.

Yes. I use it for my PiHole and Wireguard VPN.

Have a pi4 8gb and every time I need it for some mini graphics project, the GPU lags no matter how much vram I give it, so I usually end up using some old laptop with a GPU and the pi goes back to random things like data collection with sensors or some funny breadboard projects.

Also use it to evaluate lightweight linux distros.

I am actually using a OrangePiPC as:

• WLAN access point (hostapd)
• LTE Internet via a E3372 USB dongle
• radio via DVB-T dongle/Internet
• USB speakers for the radio
• Bluetooth dongle to connect to Bluetooth-enabled speaker in another room
• USB temperature sensor, motion sensors via GPIO
• VoIP telephone with connected USB headset
• small LCD display to show the current temperature and incoming call information

I'm new to the party and am still experimenting, not super tech savvy but I've been doing a few things.

I have one SD set up for retro gaming via Lakka. Wish Lakka had an option to add a desktop like RetroPie but just really love the interface and ease of use. Tried recalbox and it's nice as well! Can't remember why I settled for Lakka.

Another SD is for experimenting at the moment. As mentioned I'm brand new to the pi community so I've installed Raspbian on it and have just been testing the waters. Set up iirc my first VNC network between it, my PC and my phone. Also have been using it to rip and burn DVDs via brasero. Don't have wifi at home, I use a hotspot which complicates using my printer wirelessly so I'm considering using the pi as a network for that. There's also a cool program I found where you learn musical coding? It's pretty interesting though I still don't really know what it's for haha.

I'd really like to do more with it but as mentioned am just learning. Hell, I just got it running a few weeks ago after it had been down for a couple years so I'm sure I l'll be doing more when I find the time.

I'd love to set it up in my vehicle and have Spotify, gps navigation, retro gaming etc through it but seems like a big project with my limited understanding ATM.

RP4 running Home Assistant. Running HA in a docker container is harder than running it as the OS on a Pi4. Running HA is how I get into this, i kept trying to put more crap into HA as addons before realizing i should set up a proper server.

I assembled a handful of temp/humidity sensors (that are actually running on Wemos D1 minis).

Not much love here for the Pi Zero W. I love them for being so flipping cute. I have a couple I use when I am learning a new system admin tool or service and I need to be able to let it run undisturbed to observe stability and function.

Lately I am learning MQTT so am using one as a broker to manage some homemade smart devices.

If I can ever find one in stock, i want a couple of Zero 2 for similar projects that would benefit from the extra oomph.

Home Assistant