155

I recently moved away from MyQ to local control of my garage door and I've been loving it. I stumbled across the linked issue where MyQ shit the bed for roughly 3 days and it just confirms to me that the extra effort to move away from a cloud service was worth it. I'm down to just one last cloud service for something inside my house. My mind is pretty much made up that if I can't accomplish it locally, I won't do/use it.

all 36 comments
sorted by: hot top controversial new old
[-] root@lemmy.world 24 points 2 years ago

I actively avoid and move away from HA type devices that do not work without WAN. There's no reason that me pushing a GUI button to turn off a light needs to do anything more than travel to my AP, to HA and then to the light. Let's not bring the cloud into this.

[-] theamigan@lemmy.dynatron.me 17 points 2 years ago

You don't like being forced to buy a new garage door opener every time the manufacturer's product manager takes a shit?

[-] StandingCat@lemmy.world 13 points 2 years ago* (last edited 2 years ago)

FWIW i use myQ locally with no issues. I use the myq “homekit bridge” to integrate with home assistant locally.

[-] walden@sub.wetshaving.social 8 points 2 years ago

That's interesting, I don't think that was an option back when I was using MyQ. I guess that's why Matter would be such a big improvement for things.

[-] glimse@lemmy.world 5 points 2 years ago

First myq was completely open to integrate, then I believe they locked it down then they opened it up to homekit a year or two later.

I won't buy one out of principle. Any product or company that was a pain to work with during my days as a control4 integrator is blacklisted from my home. I won't do app-based setups, either.

[-] xtremeownage@lemmyonline.com 11 points 2 years ago

I am still using a DIY/homemade one I made back in 2020ish.

https://xtremeownage.com/2020/07/29/diy-garage-door-opener-home-assistant/

Still works perfectly. Less than 20$ of materials total. 100% local control. Locally compiled, open source firmware.

Would recommend.

[-] DeltaTangoLima@reddrefuge.com 6 points 2 years ago

Ditto here. I spent even less - a Wemos D1 mini and a relay, all housed snugly in a 3D printed case.

Has worked flawlessly for years now.

All I can say is, thank the gods for esphome and Home Assistant.

[-] xtremeownage@lemmyonline.com 4 points 2 years ago

And, the best part- Home assistant keeps getting better and better!

[-] DeltaTangoLima@reddrefuge.com 3 points 2 years ago

Yeah - I'm kinda amazed at how much functionality I'm able to get from such good FOSS like HA. I just wish they had a once-off donation capability I could use. I'm not into subscriptions at all, so I usually make a donation each month to a different tech project that has made my life better.

[-] xtremeownage@lemmyonline.com 1 points 2 years ago

I pay for the subscription solely for the purpose of supporting it. Most of the functionality it offers, just isn't useful to me.

[-] DeltaTangoLima@reddrefuge.com 1 points 2 years ago

Shame. I just don't do subscriptions.

[-] cravl@slrpnk.net 1 points 2 years ago

You can make a one-time donation via GitHub Sponsors.

[-] DeltaTangoLima@reddrefuge.com 1 points 2 years ago

Fantastic! I don't know why I didn't think to check GH Sponsors. I support plenty of other projects the same way. Thanks for sharing.

[-] walden@sub.wetshaving.social 9 points 2 years ago

Yeah, MyQ is hot steamy garbage. I gave up on it after giving it a chance for way too long. Their app, of course, will continue to work, but they would constantly change the API forcing the integration devs to scramble.

I use sonoff wifi switches with Tasmota now. They're set to turn on then immediately off, simulating a button press. Combined with z-wave door sensors and some template sensor stuff copied from a forum, it's super solid.

[-] nakal@kbin.social 7 points 2 years ago* (last edited 2 years ago)

I like Shelly hardware. The devices default to local communication and cloud is optional. Custom firmware can also be used, but not really needed. I wished they made more kinds of IoT stuff.

Since the device state can be queried with HTTP requests, it's easy to integrate it to my monitoring system (Prometheus/Grafana).

[-] chunkystyles@sopuli.xyz 1 points 2 years ago

I wish I could get their stuff in Zigbee.

[-] peregus@lemmy.world 2 points 2 years ago

Exactly, the community has been asking them to make ZigBee devices and they just announced the new...ZWave line of products 😭

[-] theamigan@lemmy.dynatron.me 2 points 2 years ago* (last edited 2 years ago)

Nothing wrong with Z-Wave. I have 3 radios (2 zw [one for Aeotec HEM since it generates tons of traffic], one zig) just so I can use whatever is cheapest or available for a particular application. All of the "energy controlling" (meaning, not light bulbs) is ZWave because it seems to have more robust state verification built into the protocol. Also, it's 915MHz and I live in a very crowded RF environment on 2.4.

[-] peregus@lemmy.world 1 points 2 years ago

No no, don't get me wrong, nothing wrong with Z-Wave, I just prefer ZigBee because I've found more expensive devices or no alternatives on Z-Wave: buttons, temperature/motion/door sensors, bulbs. What Z-Wave devices do you have?

[-] theamigan@lemmy.dynatron.me 1 points 2 years ago

I agree mostly; for example, ZW bulbs are outrageously expensive. I have a Kwikset lock, a couple Zooz ZEN15s, some dimmable lamp modules, Aeotec HEM, a Remotec IR AC controller, GE switches, and Honeywell T6 Pro thermostats.

[-] OminousOrange@lemmy.ca 1 points 2 years ago

I just ordered a pair of the ratgdo devices for full, local-only control. Ratgdo also allows control of the lights separaely, so I'm going to automate the light turning on when someone goes into the garage.

[-] obinice@lemmy.world 7 points 2 years ago

local control of my garage door

This is wild. I never imagined I'd even need to control a garage door remotely o.O

[-] MrQuallzin@lemmy.world 14 points 2 years ago

For me it adds some reassurance if my garage door is closed while I'm away

[-] qupada@kbin.social 4 points 2 years ago

I've definitely forgotten to close mine once or twice, even though my custom (LoRa) integration is just simulating pushing the button on the wall by closing a relay contact and watching for closed status with a reed switch, it means I can do it from anywhere.

[-] phx@lemmy.ca 6 points 2 years ago

Yeah, my IoT network is segregated from any of my regular network. The control node can be accessed by VPN but otherwise has no access to or from the internet

[-] peregus@lemmy.world 2 points 2 years ago

That's my setup too!

[-] chockblock@lemmy.world 4 points 2 years ago

Unfortunately my furnace (Rheem) only works this way which is so disappointing. I wish it could be cracked so that it could work independently with home assistant.

[-] NegativeLookBehind@kbin.social 3 points 2 years ago

Anyone have some recommendations for a camera system without a cloud component?

[-] Feliberto@programming.dev 3 points 2 years ago

Anything RTSP will do, but I'd recommend VLAN the shit out of it unless you are confortable having it call home every second.

I use wyze cameras with custom firmware.

[-] HidingCat@kbin.social 1 points 2 years ago

Ooo, you can do that with Wyze? That'd be the best of both worlds. I'll go search on it, but if you have any advice, I'm all ears.

[-] buedi@feddit.de 2 points 2 years ago

We use Reolink wired with PoE and recently switched from ZoneMinder + ZMNinja to Frigate + Home assistant and are very happy so far.

[-] Omacitin@lemmy.world 2 points 2 years ago

Have you checked out Frigate? It's a local service that captures RTSP streams from cameras and uses neural net image recognition to trigger events / recordings. It has good integration with Home Assistant.

[-] undrwater@lemmy.world 2 points 2 years ago

I'm using zoneminder. It might be a high bar to entry, but once set up, it's great.

[-] OminousOrange@lemmy.ca 1 points 2 years ago

I have Blue Iris NVR with Reolink cameras. A bit of tweaking, but it was easy to follow tutorials online and they integrate into HA nicely. Blue Iris isn't free, but I couldn't get Frigate to work and don't have the background to troubleshoot it very well. I'd say it's worth the cost, though.

[-] jo3shmoo@sh.itjust.works 1 points 2 years ago

Personally I've been pretty happy with Unifi Protect. Reliably records locally but accessible remotely and notifications are quick within a few seconds. Cameras can connect to HA and support RTSP if you want to link them into Frigate.

this post was submitted on 12 Sep 2023
155 points (100.0% liked)

homeassistant

15278 readers
7 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS