I wanted to build a split Ergo from scratch, with a slightly more aggressive stagger than the Lily58 style board I had previously built. I also wanted to have a stabilized 2U spacebar and some RGB. The part that was most time-consuming was definitely designing the case in CAD and getting the switches and stabilizers to fit properly. Fortunately, it's all pretty well documented so there wasn't too much trial and error involved. Overall, it turned out pretty well!
The internals
This is VERY nice.
Very nice design, I like it very much. The connection cable is self-made?
Thanks. Yep, cable is DIY
This is absolutely gorgeous!
Isn't it great to make your own design that has the features you want in it. I found myself wanting a lot more aggressive stagger from what is common (my 'Q' is a full key-length down from where 'E' is. I mostly came up with by just looking at my fingers.
To mirror another commenter, perhaps consider doing a PCB next time. I did it after my first build, and am very happy with the result.
This is really, really cool. I would love to do this one day. How does it feel to type on? Any reason you didn't make a PCB? They're really cheap these days
What processor did you use?
I am using Elite Pi microcontrollers (RP2040)
Nice! I've been doing a lot of learning of the ESP32 world for IoT stuff. It has built-in Bluetooth! Looks like that one is pretty similar!
That is super slick
This has such a nice finish, you really went above and beyond to get it looking good.
I don’t know much about 3D printing, how did you get the outer surfaces looking so clean?
Either he used ironing or an resin printer. I don't know if you can get such a smooth surface with just ironing.
He could also sanded it
Thanks! The top surface looks pretty clean because I used the ironing feature, where the hot nozzle of the printer runs across the surface without extruding filament (or very little) to even out imperfections and small gaps. The print has its problems tho, probably like any 3d print. Optimizing your 3d printer and the print results is basically a hobby in itself.
It's so beautiful, I want them! haha
Thanks! I can give you the files so you can print it yourself 😉
Do you have a link you can share? I'd love to build an ergo one of these days, and your design is simply beautiful 😍
You're so kind! Thanks a lot
Ergonomic, split and other weird keyboards
Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)
i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²
¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid
No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.
This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.