I have recently setup my paperless-ngx instance and have uploaded all my scanned documents. Now I have to tag all that stuff which seems like a lot of work. So I'm looking into paperless-ai... 🧞

If hardware service counts. :) I have been fighting for the last few months with my Promxox server telling me a drive went read only , from a SSD and even a HDD, very odd behavior and it finally pulled the last straw with me last Thursday. I had a 4TB drive acting as my Storage/backup drive which this complained about so I put a 1TB drive in which is pretty much 2 yrs old so plenty of life on it.

I went through and tested the SSD with extended tests and it passed with flying colors, so it dawned on me, maybe it's the SATA data cable, and sure enough, it was. When I had run the sudo smartctl -x -T permissive /dev/sdb it only presented very little information on it, swapping the cable and it now presents the full SMART data and stats as it should. Additionally, it's been more stable with the performance so far. So I call that a win.

In the software side, I have been going through the Home Assistant instance and removing dead/old entities I never had gotten to removing

Slowly building up my self hosted test env in a VM on my gaming PC.

Most recently playing with homepage so I don't have to remember as many sub domains.

Eventually I will get the *arr stack going so my jellyseerr instance is more automated.

I spun up a new Plex server with a decent GPU - and decided to try offloading Home Assistant's Preview Voice Assistant TTS/STT to it. That's all working as of yesterday, including an Ollama LLM for processing.

Last on my list is figuring out how to get Home Assistant to help me find my phone.

I lost all my inpsiration after my last install. I've literally just got immich and a raid array. I want to add a few things:

• Public facing website
• Jellyfin
• VPN server
• Individuous
• XMPP

I have setup a immich docker container and am slowly moving users and images from google photos.

I'm eternally sitting here putting off migrating my homelab from docker to rootless podman due to some rather janky patterns I use. It might be super smooth or it might not so instead I just wait in endless decision paralysis

I. Build a PC for video editing because it was becoming impossible to do on the laptop. I realized that I can use the GPU also to run large language models myself.

So this week I've been setting up ollama and Open WebUI to be able to move some of my queries I ask ChatGPT and ask them on my computer, even if I'm away.

This way I don't need to send sensitive data to the USA and China. It works quite well but I only can use smaller models up to 14B because of the 12 GB VRAM my graphics card only has.

I'm trying to figure out setting up TrueNAS scale and docker for the first time. Building a NAS and self hosting a few things from an old all in one mini PC.

Why is it so hard to send large files?

Obviously I can just dump it on my server and people can download it from a browser but how are they gonna send me anything? I'm not gonna put an upload on my site, that's a security nightmare waiting to happen. HTTP uploads have always been wonky, for me, anyway.

Torrents are very finnicky with 2-peer swarms.

instant.io (torrents...) has never worked right.

I can't ask everyone to install a dedicated piece of software just to very occasionally send me large files

Looking for a self-hosted period tracking app with companion android app. Have done literally zero investigation at this point but it's on my todo.

I'm starting to see mastodon users on my tiny pixelfed server. It's such a good feeling.

On the sad side, my Lemmy update went south and I had to remove it off my setup. Still looking for a good replacement for max two users. Something dirt simple like GoToSocial turned out to be.

Installed grocy on a server and magic mirror on a pi. Now we can track all the daily tasks of life which makes my wife happy

I'm currently half way thru building a ZFS array using (5) 8tb Ironwolf Pro drives. I'm modelling and 3d printing a custom drive cage with brackets to hold them all inside the shitty Dell tower case I have dedicated to it. Hoping I can get it done sometime Sunday, I'm on V2 of the drive cage print and it takes like 8 hours to do lol.

I've gotten a CalDAV server, audiobookshelf, and selfhosted obsidian live sync running on my laptop while I wait for movers to bring my shit to my house. Then gotta migrate it all across to my mini PC afterwards. Doing a modular NixOS setup to replace/complement what I used to have running on proxmox.

Once everything is on a dedicated machine I'm going to make a nice little homepage for it, inspired by a previous thread here.

Set up paperless-ngx and cannot get my scanner to send a scan to a FTP server. It supposedly supports sending to FTP but doesn't have much documentation for it. I've tried FTPS, SFTP, and unsecured FTP. Both secure types just cause it to error out. But with unsecured the scanner just freezes then reboots. Really annoying me. I'm about to give up and just scan to s USB thumb drive then copy the scans to the server.

Working on Smart Playlists for Pinepods I'm the developer of the self-hosted podcast management server and Sunday is always my new feature day. I've had a lot of fun adding in new features lately. Like designing a homepage and adding OIDC login support. Don't let anybody tell you auth isn't fun.

I changed my proxmox server from zfs raid pool to software raid with mdadm. Saved me a ton of ram and cheap ssd's don't really like zfs, so it's a win win. And while messing around with drive setups I also changed the system around a bit. Previously it had only single ssd with LVM and 7x4TB drives with zfs but as I don't really need that much storage it's now running 3x1TB SSD + 4x4TB HDD, both with software raid5 so 2TB of fast(ish, they're still sata drives) storage and 12TB (or 10,6 in the real wold, TB vs TiB) of spinning rust storage.

Well enough for my needs and I finally have enough fast storage for my immich server to maintain all the photos and videos over 20+ years. Took "a while" to copy ~5TB over 1gig lan to other system and back, but it's now done and the copying didn't need babysitting in the first place, so not too big of a deal. Biggest unexpected issue was that my 3,5" hdd hotswap cradles didn't have option to mount 2,5" drives so I had to shut down the server and open the case to mount the drives.

And while doing that my piHole was down, so the whole network didn't have DNS server around. I'd need to either set up another pihole server or just set up some scripts to the router to change DNS offerings to dhcp clients while pihole is down and shorten the lease time to few minutes.

I had a bit of a hiccup with my Unraid server. It wouldn’t turn on, and I got so fed up that I decided to get rid of it. But now, I’m back on the hunt for a new home server OS, and I’m hoping to find one that’s easy to use and has a GUI. If you were in my shoes in 2025, which one would you pick?

Considering moving my stuff into a VirtualBox VM or two rather than running directly on my PC. Then at some point in the future when I have the hardware for it I can fairly easily move it to proxmox. Also means installing a clean OS on my main PC is a quicker task as it would just be install virtual box, load up the VMs and a lot of stuff would already be done.

Currently trying to figure out how to create and maintain an internal CA in order to enable pod to pod TLS communication, while using letsencrypt for my public ingresses.

Finally managed to set up tvheadend with rebreoadcasted IPTV from a private group with functioning and automated import into jellyfin.
Works very well (if the IP stream doesnt crash)

Edit: Spelling mistake.
Additional info: Took me 3 weekends to figure out how it all works together, finding out that firefox browser neither on desktop nor android can play live tv on jellyfin (even with transcode) and that EPG is a bitch to get right with obscure tv stations.
And webgrabplus has asinine documentation. Meaning: non existant. Go figure it out yourself what each parameter means, lol)

My 8GB soquartz CM4 has a broken memory chip and I can't return it, so I am contemplating whether I should throw it in the oven and hope for the best or whether somebody wants to buy a half broken one unbaked ...

Scripting enlarging 2400 10x10 png files to 512x512 Stable Diffusion generated images that look like high resolution cityscapes in the style of Salvador Dali. I can't get the API to spit out a single image.

Recently set up Nextcloud, but ran into trouble getting it to connect with a domain because of Starlink being the ISP. Found out about tailscale and have been getting things connected and accessible with Tailscale’s magic DNS that it uses.

Currently trying to figure out how to use the iOS tailscale app to connect to an exit node, which will be my server at home, but it’s not easy. Apparently it can be done through the shortcuts and automation on the iPhone, but can’t sort out a way to connect easily that doesn’t throw errors with no good documentation to say what I’ve done wrong.

still learning truenas. i think I've figured out nextcloud which is basically a nightmare whenever I've had to install it

Working on testing stalwart... And will need to organize and document properly my various nft rules and routing tables, because its slightly getting out of hand...

Recently set up OliveTin on a pi zero w for some automation scripts I wan to be able to trigger from my mobile. I'm loving it.

I'm iterating again on my lab setup and moving a few apps that I expose externally to their own VM so I can lock that sucker down even further. Right now I have a few different servers with podman/docker containers grouped by application type. e.g. critical apps: foregjo, nextcloud, vaultwarden. My arr stack. Media consumption. Knowledge & tracking apps, and general apps.

I eventually intend to throw the external apps into a DMZ VM but my network isn't setup to do that right now, so instead I'm getting them set up on their own host and will lock down the firewall to only allow it to communicate with my reverse proxy and nothing else.

It's been fun reworking my Ansible playbooks to do all my server provisioning (still need to figure out Terraform) along with running app installs and updates automatically at the press a button. Working with firewall rules via Ansible was a bit of a headache at first but now I'm in a really good spot.

I'm also testing out linkwarden and hoarder to finally replace what I lost with Omnivore a while ago.

I had my VPS go down due to a PSU issue. Os there any legal recourse for getting my 0.14% of the monthly cost back?

We finally got our music server set up after a lot of finagling with wireguard. It's really cool; we have slsk-dl set up to batch download our playlists from Soulseek, which we can then play in Jellyfin. Next I'm gonna set up Nextcloud for backing up photos, projects, the whole shebang.

Attempting to get my lemmy instance going properly. Got it running on digital ocean but they don't allow outgoing email and reccomend a third party service. I decided to try out Hetzner and am getting errors saying that docker compose isn't installed when running the ansible script.

Trying to get headrest working in docker. But backups end up filling my host drives docker volume with cached chunks.

Tried setting and volume mounting the cache dir but it still fills up.

Duplicacy worked though so might just stick with that. Just gotta try restoring files now.