Connecting several tracks to the same pad (discuss.tchncs.de)

submitted 2 years ago by martagdm@discuss.tchncs.de to c/askelectronics@discuss.tchncs.de

7 comments fedilink hide all child comments

Hello everyone! I'm designing a PCB and I have some doubts about how to connect the 4 resistors at the top to capacitor C34. They are 4 traces, and all of them terminate at the same pad of the capacitor. As I have currently placed them, are they connected correctly? Or should I connect them in a different way?

you are viewing a single comment's thread
view the rest of the comments

[-] aabizri@discuss.tchncs.de 3 points 2 years ago

I know of no PCB fab house that prices production on how much copper is etched out of the foil (even though they recycle the dissolved copper afterwards). On the contrary, i usually got the advice of leaving as much copper on the board as I could, as it makes their life easier (and balancing becomes very easy).

this post was submitted on 04 Jul 2023

15 points (100.0% liked)

Ask Electronics

3772 readers

1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 2 years ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de