Zigbee devices dropping out of the network (lemmy.world)

submitted 2 years ago by CAVOK@lemmy.world to c/homeassistant@lemmy.world

11 comments fedilink hide all child comments

I'm using the ConbeeII stick on a RPi3 and recently a few of my zigbee devices has just dropped out of the zigbee network. Only battery powered devices from what I can tell. I can delete them and add them again, and then they work for some time, maybe hours, maybe days, but they all just stop reporting any status updates.

I thought perhaps updating ConbeeII to the latest firmware would help, but it appears it didn't.

Anything I can do to fix this? Other than buying a new stick of a different brand?

you are viewing a single comment's thread
view the rest of the comments

[-] CmdrShepard@lemmy.one 2 points 2 years ago

I went and bought some cheap USB extension cables to move both my zigbee and zwave sticks away from any other devices and out of the Pi ports directly. Definitely helped with something as I haven't had quite so many zigbee issues since doing it.

this post was submitted on 29 Jun 2023

7 points (100.0% liked)

homeassistant

15548 readers

3 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world