1320
this technology suffers from high latency
(lemmy.ml)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 22 Nov 2023
1320 points (100.0% liked)
Programmer Humor
32536 readers
490 users here now
Post funny things about programming here! (Or just rant about your favourite programming language.)
Rules:
- Posts must be relevant to programming, programmers, or computer science.
- No NSFW content.
- Jokes must be in good taste. No hate speech, bigotry, etc.
founded 5 years ago
MODERATORS
You are forgetting the time it takes to copy the data to and from these cards. Data may be transported, but it is not usable until you copy it. Copying 20 TiB is probaply going to take some time
Fastest SD card has ~300MB/s read speed and ~250MB/s write speed. Assuming you can write to those cards in parallel, that means you'll need an additional one hour to write the data to the SD cards and another one hour to read them back. So 4 hours in total which halves the data rates to 1.39 GB/s.
That's assuming the card can actually sustain ~250MB/s write speed during the full 1TB copy. It probably can if the card is freshly formatted but I haven't actually tested it myself.
That's still very fast
you have the same problem with downloads though. In the end any download rate exceeding your disc write speed doesnt get you there faster.
ofc. you can write as you download, which makes things faster.