Is the efficiency of a DC DC converter Load independent? (www.meanwell.com)

submitted 1 year ago* (last edited 1 year ago) by ConductiveInsulation@feddit.de to c/askelectronics@discuss.tchncs.de

5 comments fedilink hide all child comments

I'm currently looking into various DC DC converters and was confused that the Meanwell DDR-60 series only shows a typical rating but says nothing about the efficiency at idle. From AC/DC converters I'm used to have a curve that starts at idle and maybe 70% and goes to 100% load, having the peak at ninetee something.

(Edit: link goes directly to the PDF)

you are viewing a single comment's thread
view the rest of the comments

[-] HewlettHackard@lemmy.ca 6 points 1 year ago* (last edited 1 year ago)

It’s similar to AC-DC. From a simplistic perspective, efficiency at idle will be 0% because the converter itself still uses some power, then efficiency increases with load since the converter overhead becomes less significant as the useful work increases. Googling “dc dc converter efficiency curve” gives plenty of results.

[-] ConductiveInsulation@feddit.de 2 points 1 year ago

So I guess I have to contact Meanwell and ask why the linked Datasheet is not showing that curve. Thanks for the answer.

[-] pneumapunk@lemmy.sdf.org 2 points 1 year ago

They might be willing to spec it as "quiescent current" (current drawn at 0 load) even if they don't provide a full curve. Annoying that it's not on the datasheet.

this post was submitted on 25 Jun 2023

4 points (100.0% liked)

Ask Electronics

3265 readers

59 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de