11
Routing local requests directly to server instead of cloudflare tunnel (feddit.de)
submitted 1 year ago* (last edited 1 year ago) by Scrath@feddit.de to c/selfhosted@lemmy.world
12 comments fedilink hide all child comments

Hey everyone, I wanted to ask for some help regarding my DNS setup and for routing requests to my selfhosted services.

Currently I use Pi-Hole as a DNS server with my routers default DNS server as the upstream server. This allowed me to define local DNS entries using Pi-hole and route my requests to these domains directly to my local services. For example I bought a domain a while ago and in preparation for setting it up, I had it entered as a local DNS entry pointing directly to my servers IP address.

Earlier today I finally got around to setting up a cloudflare tunnel to expose one of my services to the outside world using the domain I bought. Ever since I did that, all requests to that domain seem to exit my home network, go through cloudflares network and then return through the tunnel, even though I have a local DNS entry for that domain name.

What I would prefer is for the request to be routed directly to my server instead, since I am in the same network already. Since my DNS server is the Pi-Hole, I figured this should happen automatically.

Is there an issue with my Pi-Hole setup? If there is any information missing I'll be happy to provide it. I wasn't sure what information I could safely post here.

Solution

I think I managed to fix the problem. After enabling the option Never forward reverse lookups for private IP ranges in Pi-Hole and clearing my DNS cache again, nslookup only returns local IP addresses instead of the IPv6 address of two cloudflare servers.

you are viewing a single comment's thread
view the rest of the comments
[-] DeBaum@discuss.tchncs.de 1 points 1 year ago

I have the (more or less) same setup. Your DNS entries on your pihole instance should point to the local ip of your server (192.168.x.x).

If thats the case check the dns settings of your router. Under DHCP settings there should be a input field for your dns server. This has to be the local IP of your pihole.

One thing you could do to start diagnosing the Problem is running this command: nslookup servicename.yourdomain.tld. This should return your local IP and not a public one.

How do you determine that the requests are leaving your Network?

[-] Scrath@feddit.de 1 points 1 year ago* (last edited 1 year ago)

When I use tracert I can see the package going through a server in Frankfurt which is definetely outside of my local network. The final IP address that tracert shows me is from a cloudflare server in california (2606:4700:3033::ac43:b10f) according to this site: https://whatismyipaddress.com/ip-lookup

Using nslookup for my domain I get 3 addresses. The first two are cloudflare addresses in the US. The final one is my servers local IP address.

[-] DeBaum@discuss.tchncs.de 1 points 1 year ago

Pihole seems to upstream your requests although there is a local entry for that domain in your settings. Maybe it has something to do with using IPv6? Maybe your device prefers the cloudflare IPv6 over your local IPv4 address.

Or Maybe your device queries your pihole as well as your Router to get the IP. Check your current dns server on your device: ipconfig /all (Windows)

[-] Scrath@feddit.de 1 points 1 year ago

I think I fixed the issue by enabling the Never forward reverse lookups for private IP ranges option in Pi-Hole. After that I flushed my dns cache again and called tracert for my domain name. I only get one hop directly to my server now. nslookup also shows only local addresses now.

[-] Scrath@feddit.de 1 points 1 year ago* (last edited 1 year ago)

Looking at the output of that command I get the following for my ethernet network interface

DNS-Server  . . . . . . . . . . . : fd98:1919:5915:0:3053:4134:bdc9:295d
                                          192.168.1.60
                                           fd98:1919:5915:0:3053:4134:bdc9:295d

Using nslookup on that IPv4 address tells me that all of those addresses are pointing to my pi-hole

nslookup 192.168.1.60

Server: pi.hole
Address: fd98:1919:5915:0:3053:4134:bdc9:295d

Name: pi.hole
Address: 192.168.1.60

I've added another local DNS entry on my Pi-Hole which points the domain I use to the same server but this time uses its IPv6 address. That doesn't seem to help though or it takes some time to update. I flushed the DNS cache on my machine after adding this entry though.

this post was submitted on 19 Sep 2023
11 points (100.0% liked)

Selfhosted

40152 readers
516 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz