6
Advice needed (lemmy.world)
submitted 1 year ago* (last edited 1 month ago) by BloP@lemmy.world to c/networking@sh.itjust.works

Hello networking community! I need a setup where I can forward my server from my private network to another network which has a public ip to forward the server itself to the internet. When a client connects to the server, traffic should get forwarded to my private network somehow. I know that's possible, but don't know how I can achive that.

Came back after a year, got some knowledge. I achieved this setup using WireGuard (+ PersistentKeepAlive) and custom iptables rules on an old laptop with barebones arch install. By masquerading, we loose the source ip when forwarding, and to preserve it we need a L2 tunnel (L2GRE).

you are viewing a single comment's thread
view the rest of the comments
[-] BloP@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

So, I can receive incoming traffic using IPv6 despite I don't even have a public ip? (nv my ISP doesn't support IPv6)

[-] orangeboats@lemmy.world 2 points 1 year ago

If you have IPv6 connection and the address starts with "2", then your public address is the IPv6 address.

[-] BloP@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

Nope it just doesn't support it. I tinkered a bit in router config enabling IPv4/IPv6. But didn't get IPv6 address from ISP. Still using ADSL2+

this post was submitted on 08 Jul 2023
6 points (100.0% liked)

networking

2811 readers
1 users here now

Community for discussing enterprise networks and the ensuing chaos that comes after inheriting or building one.

founded 1 year ago
MODERATORS