4

It's the classic "you've plugged the charger in but you have to wiggle it a million times and get it in a perfect position for the laptop to actually charge". Obviously, this is less than ideal.

I've ordered a replacement charger just in-case it's the actual adapter that's the issue, but if the port itself is broken, does anyone know if this is fixable easily? Are there any guides anywhere? I guess maybe the pins inside could be bent or something

you are viewing a single comment's thread
view the rest of the comments
[-] Madbrad200@sh.itjust.works 1 points 1 year ago* (last edited 1 year ago)

Yeah I found a guide on how to replace it and bought a part, it's a massive hassle but doable (you basically need to take apart the entire laptop).

USB C PD charger

not ideal since W541 doesn't have a USB C port (it has 3.0) but I have considered this. I assume all I'd need is a USB C to USB 3 adapter for this to work.

[-] sopo@sopuli.xyz 2 points 1 year ago* (last edited 1 year ago)

No I mean a USB C to Lenovo Square tip (the name of that Lenovo yellow plug) adapter, no USB A involved.

USB C PD charger > USB C - C cable > adapter > laptop. I've done this on many thinkpads, the only thing is if you use a small charger (45W or less) and have a big battery or the laptop uses a lot of watts, it might not charge or charge only when off. With 65W you're good, and with GaN tech they are tiny nowadays

This is also so you can also charge your phone tablet or anything else usb C while traveling with only one charger

this post was submitted on 14 Aug 2023
4 points (100.0% liked)

ThinkPad

1394 readers
6 users here now

IBM and Lenovo ThinkPad laptop enthusiasts!

founded 4 years ago
MODERATORS