182
submitted 2 months ago by zabadoh@ani.social to c/coffee@lemmy.world
you are viewing a single comment's thread
view the rest of the comments
[-] FreeBeard@slrpnk.net 8 points 2 months ago

Do people think that the Aeropress is the ultimate coffee maker? Because if not, why pay the premium? I have one as well and I love it for the 20€ it costs me. For 170€ you could get a decent filter machine. Do people not Google for alternatives?

[-] Cethin@lemmy.zip 8 points 2 months ago

It's all just personal preference, but yes, many people do think it's the best way to brew coffee. Some people think it gives you microplastics, but it can't be substantial. If it were substantial you'd see your aeropress wearing away. Washing after your done should keep the amount low, if it were measurable at all.

[-] SaveTheTuaHawk@lemmy.ca 3 points 2 months ago

If it were substantial you’d see your aeropress wearing away.

Exactly. People want to be afraid. That's what the internet is good at.

[-] FreeBeard@slrpnk.net 2 points 2 months ago

Now I wonder in what kind of packaging these people buy their coffee. And how they filter their water...

[-] SaveTheTuaHawk@lemmy.ca 2 points 2 months ago

If aero press gave anyone microplastics, which no one even knows what that is, then they would wear out. I've had one in daily use for 15 years.

Microplastics are Reddit fear.

[-] snoons@lemmy.ca 1 points 2 months ago

You don't need to see wear marks. Microwaving food in plastic containers is enough to cause contamination. Likely the same when filling with hot water; although, haven't seen studies specifically focused on that, I don't think the thicker walls will do much to limit contamination. This is also not considering the plunger.

[-] Cethin@lemmy.zip 1 points 2 months ago

Yeah, I'm aware. It's just not going to be a substantial source. Microwaving in cheap plastic containers is much higher heat for a longer time, and it's usually flimsy plastic designed to be thrown away. Those containers always warp as they're degrading. I've never seen an aeropress warp. The condition of the plastic does not seem to be effected in any noticeable way. I'm sure you do get a non-zero amount of microplastics, but our water has a non-zero amount of microplastics. We're well beyond the point of worrying about tiny amounts.

[-] leriotdelac@lemmy.zip 5 points 2 months ago

Some people prefer Aeropress, but would like to drink it without microplastics.

[-] SaveTheTuaHawk@lemmy.ca 3 points 2 months ago

Don't type on your keyboard! Microplastics! Ahhhh!

[-] FreeBeard@slrpnk.net 1 points 2 months ago

Isn't the rubber lid under the highest mechanical stress? What material did they choose there to avoid plastics?

[-] leriotdelac@lemmy.zip 1 points 2 months ago

Not a specialist, but I guess that friction would rub off microplastics both from the lid and the main part, and of the main part is metal, it eliminates that part at least.

[-] SaveTheTuaHawk@lemmy.ca 2 points 2 months ago

And, the mystery plastic would some how get past the paper filter (micro cellulose!).

Aero presses don't wear out.

This thread is giving me microplastics.

[-] leriotdelac@lemmy.zip 1 points 2 months ago

Those plastics don't only get inside you, but also into water sources. We can't estimate the impact exactly, and most probably your Aeropress contributes insignificantly.

Still, if you have money, there are worse ways to spend it than upgrading your plastic appliances. If you don't want to, no shame in continuing using things you got used to. But I invite you to keep in mind that consumers' habits might contribute to global issues.

As for me, I use a $1 cheap Cezve from Caucasus, and it just works. No need for filters, too.

[-] vividspecter@aussie.zone 4 points 2 months ago

An aeropress is quite a bit more portable than anything bulky and electric.

[-] FreeBeard@slrpnk.net 1 points 2 months ago

But the water filter and kettle aren't. I get that it is a niche thing but someone who affords a 170 stainless tube probably doesn't have an issue like this.

[-] SaveTheTuaHawk@lemmy.ca 2 points 2 months ago

But what about nickel poisoning from the steel alloy! Run!

[-] zabadoh@ani.social 2 points 2 months ago

You can't google for alternatives, but you can aliexpress or temu for them.

[-] beeng@discuss.tchncs.de 1 points 2 months ago

The filter machine at that price got plastic?

[-] FreeBeard@slrpnk.net 4 points 2 months ago

Yes, it looks like I underestimated how much people want to avoid having their food touch plastics. I would get a really nice ceramic poor over for half that price though.

[-] beeng@discuss.tchncs.de 2 points 2 months ago

True, I've got a nice ceramic hario but I do have to say aeropress is a bit different and more versatile.

this post was submitted on 15 Mar 2026
182 points (100.0% liked)

Coffee

10668 readers
2 users here now

☕ - The hot beverage that powers the world!

Coffee gadgets - It's always great to learn about new gadgets. Please share your favorite hardware or full setups. It might inspire newcomers to experiment!

Local businesses - Please promote your local businesses. If you are not the owner of the business you are promoting, kindly ask the owner if it's okay. It would be great if the business has a physical store to include an exterior or interior shot.

founded 2 years ago
MODERATORS