37
Your recommendation for smart plug
(sh.itjust.works)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 16 May 2025
37 points (100.0% liked)
homeassistant
14253 readers
382 users here now
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
founded 2 years ago
MODERATORS
Oh really? What is the wattage on your air conditioners? I am running one of the third reality plugs on my air conditioner that takes 550 watts and that's what I emailed them about and they recommended me to not use it. So I'm wondering if you're using more powerful air conditioners than that.
According to them, it's not the operating wattage that's the problem. It's that when the motor starts up initially, it can pull something like two or three thousand watts all at once for a very brief amount of time and then it settles down. I'm in the United States, so my plug is capable of 15 amps at 120 volts, which is 1,800 watts. They said those brief spikes at the start could weld the contacts together in the relay and cause it not to be able to turn off again.
But if you've been using it for two years, and especially if you've been using it for two years on air conditioners that are above 550 watts, that would make me less concerned.
Yup, much higher than 550w. Mine will often settle down to 650 or 700 after getting the room to temperature, but on particularly hot days and when they are just turned on and trying to get the room to the set temperature, they can easily take 1200w. I have never had an issue with any smart outlet I have bought in the past with that either.
I can understand the company not wanting that liability though. A blanket statement is easier than making customers calculate wattage or manage how many high load devices they might have on a power strip with the AC.
Okay, that's really good information to have and I appreciate it because I'm not some sort of idiot and I'm not going to go plugging in tons of high current devices like that. So I know I'm not going to like burn my house down or something.
Before I even bought smart plugs, I heard that some smart plugs were made not great and couldn't handle the load put on them and caught fire. So I was very cognizant of that from the very beginning when choosing my equipment.
Like the first couple of times, I ran the air conditioner on the smart plug. I actually kept an eye on it and kept touching it to make sure that it wasn't getting hot or anything.
they sell 'soft start' hardware to mitigate the initial load but they ain't cheap