255
Yearly reminder that github still does not have an IPv6 address (2023) (sopuli.xyz)
submitted 1 year ago by Sibbo@sopuli.xyz to c/programming@programming.dev
58 comments fedilink hide all child comments

Try the following:

$ nslookup github.com
[...]
Non-authoritative answer:
Name:   github.com
Address: 140.82.121.3

See also the completely ignored post in their forums.

you are viewing a single comment's thread
view the rest of the comments
[-] astral_avocado@programming.dev 10 points 1 year ago* (last edited 1 year ago)

I've talked to several network engineers over the years about IPv6, engineers that work as hands on with actual production infrastructure as you can get. And they all said that IPv6 would likely never be fully adopted.

[-] Wats0ns@programming.dev 5 points 1 year ago

But why ?

[-] whoisearth@lemmy.ca 1 points 1 year ago

My understanding is it's no longer that critical. The sky is no longer falling on IPv4

[-] orangeboats@lemmy.world 2 points 1 year ago

The numerous CGNAT deployed worldwide suggests otherwise.

[-] astral_avocado@programming.dev 1 points 1 year ago

I am not a full network engineer so take my opinion with a grain of salt. From what I understand, NAT with IPv4 works really really well to mitigate IPv4 address exhaustion. Then there's an issue with the amount of extra processing switches and routers need to do IPv6, we're going from 32 bits to 128 bits which is a huge increase and for switches and routers that are handling packets as fast as technically possible with a low amount of resources typically, that's a not insignificant hurdle.

It's just easier to do IPv4 in every way, plus that's what the world's been using and is used to.

[-] orangeboats@lemmy.world 6 points 1 year ago

You can't talk about NAT and then mention speed in the same statement...

The 128-bit IPv6 addresses are just four simple 32-bit integers if you think about it, but with NAT you have juggle around and maintain the (internal IP, internal Port, external IP, external Port, Protocol) tuples all the time. That's a significant overhead. Also, switches typically deal with the Layer 2 stuffs. IP is Layer 3.

See the HN discussion for more information.

It's just easier to do IPv4 in every way

Except when you have to NAT transversal. Then you are in a world of hurt.

[-] astral_avocado@programming.dev 2 points 1 year ago

Well, there's the actual engineer response I was looking for

this post was submitted on 25 Jul 2023
255 points (100.0% liked)

Programming

17534 readers
90 users here now

Welcome to the main community in programming.dev! Feel free to post anything relating to programming here!

Cross posting is strongly encouraged in the instance. If you feel your post or another person's post makes sense in another community cross post into it.

Hope you enjoy the instance!

Rules

Rules

  • Follow the programming.dev instance rules
  • Keep content related to programming in some way
  • If you're posting long videos try to add in some form of tldr for those who don't want to watch videos

Wormhole

Follow the wormhole through a path of communities !webdev@programming.dev

founded 2 years ago
MODERATORS
snowe@programming.dev
Ategon@programming.dev
MaungaHikoi@lemmy.nz