How do I get a homebrewed Switch to boot into a payload automatically? (self.piracy)

submitted 3 weeks ago by WheatleyInc to c/piracy@lemmy.dbzer0.com

7 comments fedilink hide all child comments

When I found out I had a V1 Switch, I homebrewed it as soon as I was able, and ripped all my games to put them onto an emulator. After looking further into it, I found that homebrewing could improve the console experience as well. I'm eager to use it, but I'd rather not manually inject a payload every time through Tegra. Are there any ways to make the Switch boot into a payload like Hekate?

you are viewing a single comment's thread
view the rest of the comments

[-] ubergeek77@lemmy.ubergeek77.chat 12 points 3 weeks ago

If you don't want to open this and solder a chip, then no, you can't do what you want.

The closest you can get is to enable AutoRCM, which will cause the Switch to always boot into recovery mode and accept a payload. This skips the need to use a jig in the Joy-Con rail, but you still need to inject a payload. And because recovery mode is just a black screen, you don't have any visual feedback to know if the Switch is actually in recovery mode, or if the battery is just dead.

Your best option is to just boot into whatever OS you use most, then make it a habit to keep it charged enough to not shut down.