45
submitted 3 months ago by macaro to c/whatisthisthing@lemmy.world

I'm installing a stereo head unit and don't have sound. This blue wire comes from the included harness and is the amp control wire. The control wire on the other connector at the unit also says amp control and isn't connected to anything. I'm assuming I have to connect the two wires and this thing (plus heat shrink wrap...?) will help. I'm unsure if I should use this or cut and strip the wires and find some wire nuts. How do I use this connector, (if it even is one)?

you are viewing a single comment's thread
view the rest of the comments
[-] Ifeelya@lemmy.world 27 points 3 months ago* (last edited 3 months ago)

The generic term is bullet connector. That's the male side, so you'll need a matching female connector. Did the head unit come with a bag of hardware or anything?

[-] macaro 9 points 3 months ago

Thanks, solved. I didn't see any loose connectors in the bag. There are generally a lot of dead end wires with caps and various labels.

this post was submitted on 25 Aug 2024
45 points (100.0% liked)

What is this thing?

5556 readers
55 users here now

Let us help you identify that mysterious object you’ve found.

Currently in CHALLENGE mode: If you've got something obscure knocking about, post a picture, and let's see how we do. Please prefix such posts with "CHALLENGE:" so we know we've got a fighting chance.

founded 1 year ago
MODERATORS