Hey guys, I hope you're all doing great. So basically, I just made the harlot and I used .22 LR blanks. After I fired, the cartridge case cracked on the side and there are now tiny residues in the barrel. I just glued the air rifle slugs on the front off the blank. Can anyone tell me what these are? I used .304 stainless steel, 8mm OD, 6mm ID.

https://imgur.com/a/pFlayjb

Cheers (:

Hey all. I’m looking for help with a problem that several others have had as well, and haven’t been able to find a solution for several weeks.

I’ve downloaded the NYLAUG V1.2 REMIX from odyssey probably 10 times, and can’t seem to get the file to download properly.

Apparently this may be an issue with larger file sizes and odyssey.

Does anyone have any suggestions or know where I could find this hosted by an alternate source?

I've had the honor of being able to test the new Yippee Ki Yay before public release, and I've been given the green light to start sharing more info!

Kaewon has given the deluxe treatment to the MP5 this time. Full scale, visually accurate, and feature rich, this release will enable you to print all of the most popular designs and variants. With options for MP5/MP5K/SD, Tri-Lug/Threaded/Standard barrels, various stocks, braces, all in a mostly modular package, 99% printable, meaning you print everything and use a barrel liner, along with nuts bolts springs and an AR fire control group.

The Tri-lug works. The retractable brace works, the selector switch works (though the third position doesn't have any functionality, just a nice click of the detent), everything works, just how you'd expect it to.

Feel free to post up any questions you have here. And yes, you can HK Slap it

You can pre-order kits and explore the options here.

I have seen a mention once that you can use 2 glock mag springs in a 30-35 rnd magazine for a Scorpion Evo. That it requires a use of an insert in between the 2 springs. Does something like that exist in the sea?

Since we can link directly now... This is one of my favs.

Re-posting since this didn't make it into the Ark content.

Re-Introducing my first contribution to FOSSCAD – The Carrier Keeper. I've been a big watcher/consumer and felt inspired to contribute. I learned Solidworks and created a series of simple printable storage cases for an AR-15 BCG, 22-conversion BCG and Dedicated 22-lr BCG.

Firearm components often become dirty when used or gooey when cleaned and lubed. The Carrier Keeper provides a simple place to store a full bolt carrier group. It helps keep your range bag clean and your bolt-carrier group protected.

There are 3 files to allow you to choose your desired size and use case.

Find it on https://odysee.com/@ZeroMojoro:2/CarrierKeeper-V1

Could we get a sticky with links to print setting that work really well? 300blkFDE comes to mind for PA6-CF setting, there another person with really good PLA+ settings and I can't remember their name.

https://odysee.com/@300blkFDE:b/300blkFDE-Filled-Nylon-Settings:c

The one for sale cause fk that guy and cults3d 😏