3

Hi all

When I'm on the biggest wrong on my rear sprocket I can hear a light ticking noise when I pedal.

The noise goes away when I keep the shifter pressed down, as the chain is then properly aligned with the sprocket (I think)

How would I adjust the derailleur to fix this? Do I need to change the limit screw or just the tension of the cable?

Pointers into the right direction are appreciated 😅

Thanks!

top 3 comments
sorted by: hot top controversial new old
[-] elDalvini@discuss.tchncs.de 1 points 1 year ago

What kind of shifters are you running?

With friction shifters, the spring in the derailleur might be pulling the shift lever back. You can fix that by tightening the friction adjustment screw on the side of the lever. Backing out the limit screw might also help.

With indexed shifters, you can try increasing the cable tension a bit (not too much, or it will throw off the other gears).

[-] dublet@lemmy.world 1 points 1 year ago* (last edited 1 year ago)

Park Tool has some nice videos that take you through the process of adjusting both the front and the rear derailleur. All you need is a screw driver and a few hex keys (possibly).

https://www.youtube.com/watch?v=ZNG7g83lI-s

https://www.youtube.com/watch?v=UkZxPIZ1ngY

Calvin is great at clearly explaining these things, even if they promote their own tools quite a lot. (I am not affiliated with PT.)

[-] Will8250@lemmings.world 1 points 11 months ago

If you can make it go away with the shifter, I would guess it is not the limit screw but that cable tension (I don't think the shifter would help alleviate the problem if the limit screw is set too far in). You could start with using 1/4 turn increments of the barrel adjuster at the shifter. Go slow. Do one 1/4, shift around and stop back on large cog and see how it sounds and looks.

load more comments
view more: next ›
this post was submitted on 06 Jul 2023
3 points (100.0% liked)

bike wrench

821 readers
1 users here now

A place to ask bicycle repair questions, and for bike shop monkeys to share advanced non commercial wrenching resources (no YouTube self promotion). This is only for repair related topics.

!bicycles@lemmy.ca

!micromobility@lemmy.world

founded 1 year ago
MODERATORS