327
submitted 2 weeks ago* (last edited 2 weeks ago) by neme@lemm.ee to c/technology@lemmy.world
top 50 comments
sorted by: hot top controversial new old
[-] reddig33@lemmy.world 166 points 2 weeks ago

USB C Pro Max SuperSpeed Venti Extreme

[-] bruhduh@lemmy.world 50 points 2 weeks ago

It mutilates your data

[-] finley@lemm.ee 22 points 2 weeks ago
[-] Peffse@lemmy.world 25 points 2 weeks ago
[-] _stranger_@lemmy.world 5 points 2 weeks ago

You forgot the ".2"

[-] Zedstrian@lemmy.dbzer0.com 5 points 2 weeks ago

Featuring Dante from the Devil May Cry Series and New Funky Mode

[-] Valmond@lemmy.world 5 points 2 weeks ago

Still the same as the 3.0.

[-] Romkslrqusz@lemm.ee 91 points 2 weeks ago
[-] WhatAmLemmy@lemmy.world 60 points 2 weeks ago* (last edited 2 weeks ago)

Now the EU needs to make it a legal requirement that every cable sold includes an engraving of the speed and watts on both ends.

The fact this dogshit continued for so long is unforgivable. Capitalism is most efficient my ass. It's like the USB specs naming convention was outsourced to the dumbest, most illiterate engineers alive.

On second thought, the profit motive indicates the naming convention was probably done to intentionally create confusion and sell more cables.

[-] freeman@feddit.org 67 points 2 weeks ago
[-] lengau@midwest.social 12 points 2 weeks ago

I was going to say... I've had a cable with that logo on it for over a year.

[-] moseschrute@lemmy.world 12 points 2 weeks ago

Did the logo fix everything?

[-] lengau@midwest.social 5 points 2 weeks ago

Well i still can't get the dock that came with it to output to multiple 4k monitors (even though it's supposed to be able to), so...

load more comments (2 replies)
[-] nyan@lemmy.cafe 56 points 2 weeks ago

It's disturbing that I kinda miss the pre-USB days when, if the cable matched the port physically, it also matched the port in terms of capabilities (unless someone was doing something deliberately stupid). At least that meant you knew right away whether you had the right cable or not.

[-] thehatfox@lemmy.world 43 points 2 weeks ago* (last edited 2 weeks ago)

USB-C has been a blessing and curse. One port that does everything, except when it doesn't. Even charging is now complicated by the "guess the cable that supports the right PD type" game.

Not that the old days were much better. I don't miss faffing around with the myriad of serial and parallel port modes and settings.

[-] RememberTheApollo_@lemmy.world 13 points 2 weeks ago

Problem with the old days was that you had to have each kind of cable for it to work. No LPT cable? No printer. Hope the cable is long enough. There was no integrated Bluetooth or wifi, or even a dongle available. Haven’t even gotten around to the internals yet with ribbon cables for floppy or IDE or whatever.

Yeah, USB-C comes with it’s own issues, but I much prefer this to the bin full of cables, plugs, wall warts, connectors and adapters that were kept on hand just in case.

[-] csm10495@sh.itjust.works 4 points 2 weeks ago

+1.

I wish we had type c but all cables were labeled with clear functionality from the start. I don't like data/power only cables.

[-] Nollij@sopuli.xyz 3 points 2 weeks ago

These have their place, though. The obvious example is public charging cables, which at least have had PoC for exploits.

load more comments (1 replies)
[-] Anivia@feddit.org 5 points 2 weeks ago

At least with barrel jacks that would have been an easy way to frie your electronics back then. With USB C you might encounter incompatibility, but at least you won't break anything (with a few exceptions like the Nintendo Switch getting bricked by connecting certain 3rd party chargers to the official dock, or using a bad 3rd party dock)

load more comments (1 replies)
[-] MangoPenguin 4 points 2 weeks ago

Wasnt the parallel port also used for serial for awhile? Not quite perfect but better than now I suppose.

[-] rumba@lemmy.zip 5 points 2 weeks ago

Although serial and parallel shared the same overall pin count and connector style, they used opposite genders and the two were incompatible.

Generally, If the port on the PC was male it was serial if the port was female it was parallel. But realistically you'd never see a 25-pin serial on a computer unless you were looking at something very ancient and strange. Even back into the '80s, The PCs used DB9 connectors for serial and adapters or the cable itself would have to convert it over the standard 25 pin connector on the modems.

[-] barsoap@lemm.ee 4 points 2 weeks ago

they used opposite genders

Not necessarily. For IBM PCs that was true, but my UltraSPARC had a differently-gendered serial port which was very annoying because neither standard straight nor null-modem cables worked. It was a DB-25, carrying two ports.

Those connectors were used for a lot of different things, with no autonegotiation no nothing. At least the pinout for port A was compatible with the standard DB-25 one-port pinout, just with different gender.

[-] 01189998819991197253@infosec.pub 54 points 2 weeks ago
[-] Harvey656@lemmy.world 15 points 2 weeks ago

To be fair, these were better than the previous standards.

[-] Smokeless7048@lemmy.world 29 points 2 weeks ago

Nah, I preferred USB 4 gen 3.7, 3x3, so clear and concise....

/S

[-] 01189998819991197253@infosec.pub 4 points 2 weeks ago

Agreed. I can't stand the previous symbology.

[-] bjoern_tantau@swg-empire.de 37 points 2 weeks ago
[-] davidgro@lemmy.world 45 points 2 weeks ago

This isn't that. It's relabeling the existing USB standards in a way that actually makes sense finally.

[-] bjoern_tantau@swg-empire.de 22 points 2 weeks ago

Yeah, but the old labels won't just magically disappear. Tech folks might know how to handle it but for everyone else it will be just more of the same. As far as they care for labeling to begin with.

[-] JRaccoon@discuss.tchncs.de 15 points 2 weeks ago

I think this time the manufacturers will be pretty quick at adopting the new branding; if there's two competing devices next to each other, one marked with "USB 3.2 Gen 2x2", which no one understands, and other one with "USB 20Gbps" I think the latter will sell more.

[-] Bonesince1997@lemmy.world 8 points 2 weeks ago

Yeah something you don't have to further look up to figure out what it means. Just simpler.

[-] LarsIsCool@lemmy.world 5 points 2 weeks ago

Probably. But then again, if one says "USB 20Gbps", but the one next to it has "80Gbps", it might be better to have had "USB 3.2 Gen 2x2"

load more comments (1 replies)
[-] Valmond@lemmy.world 5 points 2 weeks ago

You mean the 3.0, 3.1 gen 1 and 3.1 gen 2 that all was changed to the same thing?

Even the 3.2 gen 1 is the same as the others IIRC and you need like 3.2 gen2 2x2 to go to even 10gbps.

I'm maybe off a little bit but the gist is there, rant off/

load more comments (1 replies)
[-] DandomRude@lemmy.world 30 points 2 weeks ago* (last edited 2 weeks ago)

Fine by me, as long as the Bluetooth logo is never changed. Long live King Harald Gormsson, the unifier!

[-] darkevilmac@lemmy.zip 29 points 2 weeks ago

Took long enough for someone over there to figure out they made some mistakes with recent branding. Glad they've finally made some positive changes for end users though.

[-] JWBananas@lemmy.world 28 points 2 weeks ago* (last edited 2 weeks ago)

Ultimately, it's great that users won't need to squint to read the fine print or cross-reference spec sheets once the labels gain popularity.

I can't even read the labels on the cables in the article photos.

EDIT: I get it, you all have 20/10 vision and no astigmatism, thanks for your input.

[-] finley@lemm.ee 38 points 2 weeks ago

Reality has a higher resolution than this potato photo.

[-] ExcessShiv@lemmy.dbzer0.com 17 points 2 weeks ago

I can't even read the labels on the cables in the article photos.

...Because the image is crappy resolution, its like complaining you can't read without your glasses on.

[-] JWBananas@lemmy.world 7 points 2 weeks ago

That bottom one looks embossed instead of printed. At the size of a USB-C cable plug, that's going to be difficult to read outside of ideal lighting conditions.

[-] cmnybo@discuss.tchncs.de 7 points 2 weeks ago

That's still significantly better than having no markings at all.

load more comments (4 replies)
[-] seaQueue@lemmy.world 17 points 2 weeks ago

I'll believe it when I see it

[-] kautau@lemmy.world 13 points 2 weeks ago

Can’t wait for all the crapware to flood the market and slap that 80gbps logo on anything and everything

[-] Emerald@lemmy.world 12 points 2 weeks ago

Thank god. It's about time we call things by terms that actually matter, rather than this technical jargon like USB 3.1 Gen 2. Even if someone doesn't know what a gigabit is, they can still look at this new scheme and know that higher number = more speed. This is such an upgrade

[-] Max_P@lemmy.max-p.me 5 points 2 weeks ago

Damn that's a lot of bandwidth

[-] letsgo@lemm.ee 4 points 2 weeks ago

Great, so let's now do that with memory cards. Faster than Class 10? Call it Class 11, not Class 10 U1 or U3. Faster than Class 11? Call it Class 12. There's no shortage of numbers. Let's drop all this U1 U2 bollocks.

Yes, I am still sore about those Class 10 cards I bought for my dashcam that don't fucking work because it wants U3 and they were U1.

load more comments
view more: next ›
this post was submitted on 11 Jan 2025
327 points (100.0% liked)

Technology

61227 readers
3606 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each other!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed
  10. Accounts 7 days and younger will have their posts automatically removed.

Approved Bots


founded 2 years ago
MODERATORS