204
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 01 Aug 2023
204 points (100.0% liked)
Technology
37800 readers
248 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
No. This is just one failure to replicate. There would need to be many more attempts, an investigation, and actual proof of how they made shit up, to confirm they were making shit up.
Yup, you never know what the cause of the discrepancy could be. It seems even the original team could only get it to work 10% of the time anyway, and they were familiar with the process. Even with detailed instructions, another unfamiliar team may not be able to recreate it even that often.
Until they determine what factor is leading to the occasional creation of the product, it's effectively random whether they will create it or not. It could theoretically take 1000 tries to get it to work once. Or 1,000,000 times. But, it will probably take around 10.
That is, of course, if the product they claim to have made is real. If it isn't real, then they'll never get it. And, if they can figure out what exactly is making it or not, then they should be able to adapt the process to near perfect odds.
Reminds me of race conditions in programming.
1 in 15 times the bug happens and you can't figure it out, but if 2 asynchronous events happen to happen within 10ms of each other it breaks.
Could be some super specific timing on one of the steps where a discrepancy of a short time doesn't seem meaningful but is
This is actually quite likely:
If it wasn't all a scam, then it is very likely that a very precise temperature profile needs to be met in order for the effect to appear. It might've even been a fluke, and they themselves might be unable to fully reproduce it.
In the papers, they only got 4 samples, and still they seem to have messed around with some of them, so effectively no two samples had the same measurements (some were used for different tests, some were changed when used in the same test).
Well the good thing is they were able to reproduce it themselves so they won't drive themselves fully crazy trying to narrow that down, assuming not a scam.
I wonder how much you could automate that all to remove as much human factor as possible and be down to exact times if needed.
It makes me wonder if they were, or how many attempts it took them to produce just 4 samples.
The process should be possible to automate completely, with the right temperature profile (commonly used in electronics, for reflow ovens and such).
But I wonder if there might be some other detail they might have forgotten to take into account... like maybe at some point you have to take the sample out with non-ferromagnetic tongs, but put it in with ferromagnetic ones, or flip it to the side, or align it with the heating coils of the oven, or whatever "irrelevant detail" like that.