21
Yeah, you should be able to. You just need a suitable controller board for it. I recommend you take a look at a discussion about this on their forums:
https://community.frame.work/t/hdmi-controller-board-for-display-panel/17513/21
Whoa your link is way better, haven't looked into those adapters for a while. Thanks for the info.
My name is also Andrew.
What a coincidence haha! Happy new year from an Andrew to another! :D
You're saying the LCD panel? It's possible, you'll need to figure out how many pins your LCD uses. If I recall correctly, there are 30 and 40 pin variants, but if you are buying a new panel you'll need this info anyway.
If you know the pin configuration, you can get something like this
https://www.amazon.com/Controller-Driver-1920x1080-30Pins-Screen/dp/B06W5DTGKC
Should be a power cable to the board, then a 30 or 40 pin ribbon cable to the LCD, then audio and HDMI on the board.
I used to work in computer repair, and we had so many "lightly damaged" LCD panels. A couple of my coworkers made diy monitors with them, and had no complaints.
this post was submitted on 28 Dec 2023
21 points (100.0% liked)
Framework Laptop Community
2575 readers
2 users here now
Related links:
- Framework website: https://frame.work/
- Official Framework Mastodon: https://fosstodon.org/@frameworkcomputer
Related communities:
- Buy it for life community: !buyitforlife@slrpnk.net
- Fairphone community: !fairphone@lemmy.ml
founded 3 years ago
MODERATORS