43
Plex remote access - low quality even with gigabit fiber (lemmy.world)
submitted 4 months ago* (last edited 4 months ago) by triptrapper@lemmy.world to c/selfhosted@lemmy.world
28 comments fedilink hide all child comments

Hey all, I'm very new to self-hosting and have no background in anything computer-related. I'll explain in as much detail as I can. I'm running Plex on a Synology DS220+. I'm using the Plex app, i.e. not using Docker (see note below).

The issue: I can watch Plex on my local network in 4K, but outside my local network it barely makes it to 720p. I thought it was an issue with my upload speed, but I got gigabit last week and it hasn't fixed the issue. I have remote access enabled in Plex through a manually-specified port. The issue persists with my own account and any friends who have access to my library.

I appreciate any advice, links or questions you can offer!

NOTE: I understand the benefits of Docker and I promise to transition in the future. I spent many hours learning and troubleshooting, and it was even functional at times, but eventually I needed something that just worked.

EDIT: You all have been so helpful and supportive. Thanks for meeting me where I'm at and sharing some potential issues.

EDIT2: I found the culprit by accident. I had UPnP enabled on my router. I turned it off and my local speeds increased significantly, and my Plex library is available remotely. I don't know how or why UPnP is related, but that's what the solution was for me. Thanks again for all your input and support.

all 29 comments
sorted by: hot top controversial new old
[-] avidamoeba@lemmy.ca 23 points 4 months ago* (last edited 4 months ago)

I have three hypotheses.

  • There's a setting for remote streaming quality. It may be set to 720p.
  • The port isn't open on your router and Plex streams via a Plex relay server which limits the quality.
  • The CPU might not be fast enough to transcode beyond 720p and Plex might be transcoding for remote streaming.
[-] i_am_tired_boss@lemmy.world 10 points 4 months ago* (last edited 4 months ago)

Even if the port is open, Plex can sometimes use the relay server. You might want to explicitly disable that.

Also, you can check if the video is being transcoded on-the-fly by going to quality settings and seeing if it's showing up as transcoded or directplay. Sometimes you might have to force the directplay on your client device (Playback might fail if your device doesn't support the specific format).

[-] triptrapper@lemmy.world 5 points 4 months ago

Thanks for the concise reply!

-Streaming quality is set to original on every device I use to access Plex.

-I still get confused about open ports, but I'll check again and make sure it's not running through relay.

-I believe the hardware should be fast enough to transcode at least a couple streams, but I'll check again.

[-] avidamoeba@lemmy.ca 4 points 4 months ago

I was talking about a server side setting under Remote Access. Check there.

[-] triptrapper@lemmy.world 1 points 4 months ago

Ah, okay. Thanks for the clarification.

[-] c0smokram3r@midwest.social 3 points 4 months ago

The second one! That was also my issue when first setting up Plex. Found some good info on Plex forums & all is well now.

[-] funkajunk@lemm.ee 9 points 4 months ago

Sounds like you don't have port forwarding setup.

I highly recommend setting up Nginx Proxy Manager and using it as a reverse proxy.

I have lots of services, but using a reverse proxy means I only have to expose 2 ports (80 & 443) and then I can serve whatever I want, like Plex, over https without a relay.

[-] mipadaitu@lemmy.world 2 points 4 months ago

How do you set this up to forward properly? Do you use different domains for different services? like plex.example.com?

I currently have nginx set up to forward based on port, which is fine for me, but it could be a little better.

[-] funkajunk@lemm.ee 8 points 4 months ago* (last edited 4 months ago)

Yes, I use subdomains.

I pay for one domain name in Cloudflare (e.g. awesomedomain.com), and have a single "A" record pointing to the public IP of my server, and a single "CNAME" record with a value of * that points to awesomedomain.com.

That way, any subdomain gets directed to the server, and then you setup Nginx Proxy Manager to listen for certain subdomains and where to proxy them. No need to manage any further DNS records in Cloudflare, and any changes made on the proxy don't need any wait time for DNS records to propagate.

Nginx Proxy Manager also handles automatic SSL certs through Let's Encrypt - I really can't recommend it enough.

[-] 7U5K3N@lemmy.dbzer0.com 5 points 4 months ago

My fiber company double natted me.

https://www.reddit.com/r/HomeNetworking/comments/8tl0wv/whats_double_nat_and_why_do_i_want_to_avoid_it/

It was really messing with my Plex remote connections and my VPN.

If you can't sort it out locally might want to give your isp a call and find out if they e done the same.

P.s sorry for the shit website link.

[-] triptrapper@lemmy.world 2 points 4 months ago

Ah, Plex suggested I might be double-natted. Since fiber doesn't need a modem (from my understanding) I have: fiber cable to box, box Ethernet to router, router ethernet to NAS. Maybe it would be better if I did box directly to NAS? Or would that put it on a separate network? I'll look into your double-nat solution. Thank you.

[-] piyuv@lemmy.world 3 points 4 months ago

You need to call your isp and request a static ip. Most probably they’ll say its extra but usually around $5. If they say they don’t give static ips to individuals you can request an ipv4 dynamic address and use a ddns. ipv6 only networks also result similarly to double nat

[-] triptrapper@lemmy.world 1 points 4 months ago

Thanks for the tip. My ISP only offers static IPs for the business tier, but I'll ask about ipv4.

[-] MrQuallzin@lemmy.world 5 points 4 months ago

You said you recently got a gigabit plan, but that's related to your home download speed. Check to see what your upload speed actually is. Depending on your ISP's plans, you might have a speedy download but a slow upload.

[-] triptrapper@lemmy.world 2 points 4 months ago

I tested between 800-900Mbps UP, closer to a full gig down.

[-] ShepherdPie@midwest.social 5 points 4 months ago* (last edited 4 months ago)

If you go to canyouseeme.org and test your Plex port does it show as open?

Your new ISP might have CG-NAT meaning you don't get your own IPv4 address and can't be connected to directly.

Also stream a movie from your phone while connected to cellular data and then check that stream on the Plex admin screen to see what it says. IIRC the Plex Relay is fixed at 1mbps

[-] triptrapper@lemmy.world 1 points 4 months ago

These are excellent ideas to test where the bottleneck is. Thank you very much.

[-] Decronym@lemmy.decronym.xyz 4 points 4 months ago* (last edited 4 months ago)

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:

Fewer Letters More Letters
DNS Domain Name Service/System
HTTP Hypertext Transfer Protocol, the Web
IP Internet Protocol
IoT Internet of Things for device controllers
NAS Network-Attached Storage
NAT Network Address Translation
Plex Brand of media server package
SSL Secure Sockets Layer, for transparent encryption
VPN Virtual Private Network
nginx Popular HTTP server

9 acronyms in this thread; the most compressed thread commented on today has 14 acronyms.

[Thread #817 for this sub, first seen 18th Jun 2024, 20:45] [FAQ] [Full list] [Contact] [Source code]

[-] sunzu@kbin.run 1 points 4 months ago* (last edited 4 months ago)

This bot is a total CHAD but can bots really edit their post?

[-] tehgersh@lemmy.world 4 points 4 months ago

One thing I haven't seen called out that could be a contributing factor is the hardware capabilities of the playback device. Depending on the codecs used in your media, there may not be hardware accelerated decoding support if the playback device is a smartphone. This may cause the plex to decide to transcode your media into a format that is supported by your playback device.

Also, hardware accelerated transcoding is a subscription based feature. Without plex pass active, the transcode will be CPU based only. The dual core CPU will almost certainly not have enough oomph to transcode anything beyond 720p, but the CPU has Intel QSV support so plex should be smart enough to use that.

[-] triptrapper@lemmy.world 1 points 4 months ago

This is good to look into. I've tried remote streaming on several different devices. Before I bought the NAS I was sure it could handle a few streams, but maybe I was wrong.

[-] leverage@lemdro.id 4 points 4 months ago

Regardless of what the remote access test says about it being available, I had to manually port forward to fix this same issue.

[-] triptrapper@lemmy.world 1 points 4 months ago

Thank you for this. I'll check my port forwarding on my router (Google Nest WiFi).

[-] paraphrand@lemmy.world 3 points 4 months ago* (last edited 4 months ago)

I have gigabit, and struggled to stream. Turned out I had the Quality of Service (QoS) /traffic priority settings on my router misconfigured.

This might be something to look into.

Can a remote user download something from your network at a reasonable and consistent speed? (Not using Plex)

Can you upload a large file somewhere and monitor the speed and see if it maintains speed as expected?

For me, these two things were also performing at unexpectedly low speeds, or being wildly inconsistent until I fixed my QoS settings.

[-] triptrapper@lemmy.world 2 points 4 months ago

Unfortunately I'm using Nest WiFi and it doesn't have QoS settings. You're making me consider buying a new mesh router system because Nest also doesn't have manual band selection, which I need for some IoT devices.

[-] K3can@lemmy.radio 1 points 4 months ago

I have the older "Google WiFi" mesh and I was able to install OpenWRT on them. You might want to see if that's an option for yours before spending money on a new system.

[-] ramielrowe@lemmy.world 3 points 4 months ago

I have a similar issue when I am visiting my parents. Despite having 30 mbps upload at my home, I cannot get anywhere near that when trying to access things from my parents house. Not just Plex either, I host a number of services. I've tested their wifi and download, and everything seems fine. I can also stream my Plex just fine from my friends places. I've chalked it up to poor (or throttled) peering between my parents ISP and my ISP. I've been meaning to test it through a VPN next time I go home.

[-] triptrapper@lemmy.world 1 points 4 months ago

Thanks for sharing your experience. I pay for a static IP through my VPN provider, and I've wondered if there would be a benefit to running my server through the static IP, then using the same IP to access the server remotely. (Not sure if I'm describing that correctly.)

this post was submitted on 18 Jun 2024
43 points (100.0% liked)

Selfhosted

40152 readers
631 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz