Accurate/smart oil sensor? (discuss.tchncs.de)

submitted 9 months ago by Balakirev@discuss.tchncs.de to c/homeassistant@lemmy.world

18 comments fedilink hide all child comments

We heat our house with oil (grumble grumble grumble) but our float sensor is not a very accurate measure and it's out of the way to actually see. Has anyone come across a sensor that works with HA and has been reliable? Bonus points for something that still has an "analog" view in case of problem

I've seen some sensors on Amazon but I'm skeptical of anything through there.

you are viewing a single comment's thread
view the rest of the comments

[-] theamigan@lemmy.dynatron.me 5 points 9 months ago

Get a Beckett Rocket and an RTL-SDR dongle. You can use rtl_433 to decode the chirps from the Rocket and do whatever you want with them. You keep the float, it screws into an unused port on the top of the tank.

[-] Balakirev@discuss.tchncs.de 4 points 9 months ago

I think this is exactly what I'm looking for! Have you used these in the past? I like that I can keep the float

[-] theamigan@lemmy.dynatron.me 3 points 9 months ago

My brother has a Rocket in his tank, it works great.

[-] thehatfox@lemmy.world 1 points 9 months ago

I have a similar setup but with an ultrasonic sensor instead of a float sensor. rtl_433 had support for the sensor, and I could get a good signal reception with an RTL-SDR and cheap 433MHz antenna. I can even pick up signals from a neighbours tank that is some distance away.

[-] theamigan@lemmy.dynatron.me 1 points 9 months ago

The Rocket is ultrasonic.

this post was submitted on 22 Jan 2024

16 points (100.0% liked)

homeassistant

12025 readers

80 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk