Are there any neat cases for the Raspberry Pi 3B+? (leminal.space)

submitted 1 month ago by CorrodedCranium@leminal.space to c/raspberrypi@lemmy.ml

4 comments fedilink hide all child comments

I am not sure if any interesting ones have been made since focus shifted towards the 4 and 5. Maybe there are some specifically designed around using different HATs like UPS, LoRa, or the camera module.

I'm mostly seeing the average layered 3D printed cases and the mock consoles designed for emulation.

I'd also be interested in hearing some neat projects people are using them for. I have two spares from a while ago that I used for a NAS and an e-ink displayed weather forecast.

you are viewing a single comment's thread
view the rest of the comments

[-] deafboy@lemmy.world 3 points 1 month ago

Flirc cases are nice, but the rubber parts do not handle the high temperatures well.

One of my pis is running inside a cupboard, so not ideal in terms of ventilation. The rubbery top and bottom of the case has started to dissolve into a sticky oil that was a bitch to clean up. The plastic underneath looks OK, so once the rest of it dissolves it will look normal again.

The other pi with the same case that's out in the open shows no signs of degradation.

[-] retrolasered@lemmy.zip 2 points 1 month ago

Thats helpful to know, thanks. I was going to use a flirc case inside a magic mirror but I wont do that now 😅

this post was submitted on 26 Sep 2024

11 points (100.0% liked)

raspberrypi

3255 readers

1 users here now

Community about the single-board computers, micro-controllers and related projects.

https://www.raspberrypi.com/

Other RaspberryPi communities on Lemmy

founded 4 years ago

MODERATORS

testman@lemmy.ml