What in the world is a cold camera shoe?
It's a slot on a camera that you can use to attach accessories, like a microphone or flash. A hot shoe provides power to the accessory, a cold shoe does not.
Neat!
Well, see what a hot camera shoe is?
Just Leave it outside for a while, and there you are.
Its a non-powered version of a hot shoe, both of which are the thing you use to mount an external flash that's on the top of a lot of (all?) full sized cameras.
Why would you attach an image that does not show what you are referring to?
See fig. 1 (unrelated)
What the heck is a camera shoe?
The "hot shoe" is the mount for a flash or other accessories on a camera https://upload.wikimedia.org/wikipedia/commons/9/9f/Canon_350D_Hot_Shoe.jpg
Okay what's a "cold camara hot shoe" then?
The "shoe" is the mount. "Hot" means powered, for things like flashes. "Cold" means unpowered, for things like tripods.
If you’re talking about this thing, it serves two purposes. It is the hook that opens and closes the line (hangs up and picks up the phone), and it is used by this thing
to keep the handset from falling off the base when it’s mounted on a wall.
Or maybe you meant this thing. Yeah, it keeps the handset in when the base is mounted vertical. You can see that it’s slanted in the back.
That’s so it slides in and out on this other slanted lip on the handset instead of getting caught on it. You can take the handset off just by pulling it directly away from the wall.
Btw, on Trimline phones it is reversible for if you’re not hanging it on a wall. It looks like this when you pull it out.
Exactly this. It’s called a “hook” and when the phone is “off the hook” that’s the thing it is off of. Being off the hook means the phone is powered up and connected to the local loop. When the phone is “on hook” that means it is disconnected from the loop and awaiting the pulsed ring signal.
Desk phones have a reversible hook so that it keeps the button depressed when the phone is in the cradle but doesn’t catch when you attempt to pick it up.
On modem signals in the old days, the + was equivalent to “flashing” the hook, or quickly disconnecting and reconnecting to the loop, and the AT command H1 told the modem to go “on hook” while H0 told it to go “off hook”.
Back before the DTMF network, when everyone used pulse modulated phones, the “pulses” were caused by going in and off hook in a specific pattern. You could actually make a phone call from a rotary payphone by flashing the hook in the pattern that mimicked the rotary dial pulsing the line as it rotated back to home position.
In the really old days, the hand crank served much the same purpose, but actually supplied electricity to the local loop; when the phone was on hook (which was a big metal thing the earpiece sat in) someone else turning the crank would make all the phones on the loop ring; you picked up if the ring matched the number of rings for your extension.
Much better than the older design which cannot be mounted on the wall.
And the even older design that didn’t even have a bell integrated in the base. The bell was in a separate bell box.
Or one of these real old designs that didn’t even have a bell. It has a buzzer that’s barely audible (it might even just be the phone’s speaker, idk). Also, the microphone and the earpiece aren’t in a convenient handset.
This one is a replica made in probably the 1970s or 1980s. It’s funny, when it was made it was a replica of something vintage, but now it actually is vintage.
You have a very interesting phone collection and I appreciate you sharing! Unlocked memories I didn't even know I had! 😃
Huge props for the unexpected old phone exhibition. It was very interesting, thank you :3
Well, cannot be wall-mounted like the one in your picture but those phones did get wall-mounted in slightly different shape.
Interesting. I’ve never seen a phone like that. Usually the wall mounted versions of the Model 500 had a hook for the handset in the front of the base to hang the handset vertically. This one looks like a different company than Western Electric though. I’m guessing it’s a UK company, because it’s 999 for emergencies (or at least it’s not US). You’ve got me curious enough I feel like I’m about to go down a rabbit hole.
Edit: yep, it’s a UK company called GPO. This is their model 741:
https://www.britishtelephones.com/t741.htm
https://gpospares.co.uk/gpo-spares-gpo-bt-741-wall-dial-telephone-two-tone-grey.html
What a cool design! I would love one for my collection.
Like and follow for more astonishing technologies from bygone eras!
(Do people really no longer have phones on their desks or what?)
could had posted a picture of a horse it would be just as helpful but a lot funnier
You're description only leaves me with more questions. I have no idea what you're talking about, and therefore have no answer.
Lots of people in this thread answering the question but they're kind of just guessing what you're talking about.
Perhaps you could circle the bit in question because it's either a holder for the headset or a way to mount the entire device onto a wall or something else depending on if we've interpreted your words correctly.
I'm pretty old and even have a camera that uses these things, and took a class on photography; never heard them called a shoe until reading this thread. 🤷🏻♂️
English is not my first language and I don't understand what camera shoe mean. But I think I know what you're asking for. That phones can be mounted on a wall and what you're asking for is there so the handset doesn't fall off.
It's ok. English is my first language and I don't understand what OP means by "cold camera shoe."
Native English speaker here, I don't have a clue what a "cold camera shoe" means either...
This is the camera shoe for a Sony DSLR
Edit: note that this is a "hot" shoe because it has contacts that can power accessories. A cold shoe is just a mount. You can use to to attach a flash or a microphone for example
Not sure if this is what you’re describing, but phones like the one you pictured have a reversible tab for use if you mount the phone to a wall - if the tab is sticking up, it keeps the receiver from falling off the cradle.
Here’s a site selling them, but it has a diagram showing where it’s located:
https://www.zcover.com/store/catalog/zCProduct.php?wp=WP_CI881CTR&zPath=212-213-255
Holy shit I'm old
The intersection of people who aren't five figures into photography and know what a hot shoe is, and people who recognize a wall mount phone trend old.
It's for a hook to keep the handset on when the phone is mounted flat on a wall. It can usually be slid/folded down or removed when its not need.
It holds the receiver in place. Generally the ridged end is used for wall hanging installs, the flat end stores it away until needed since the desk is horizontal.
No Stupid Questions
No such thing. Ask away!
!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.
The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:
Rules (interactive)
Rule 1- All posts must be legitimate questions. All post titles must include a question.
All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.
Rule 2- Your question subject cannot be illegal or NSFW material.
Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.
Rule 3- Do not seek mental, medical and professional help here.
Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.
Rule 4- No self promotion or upvote-farming of any kind.
That's it.
Rule 5- No baiting or sealioning or promoting an agenda.
Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.
Rule 6- Regarding META posts and joke questions.
Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.
On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.
If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.
Rule 7- You can't intentionally annoy, mock, or harass other members.
If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.
Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.
Rule 8- All comments should try to stay relevant to their parent content.
Rule 9- Reposts from other platforms are not allowed.
Let everyone have their own content.
Rule 10- Majority of bots aren't allowed to participate here.
Credits
Our breathtaking icon was bestowed upon us by @Cevilia!
The greatest banner of all time: by @TheOneWithTheHair!