Sengled's servers are dead again, so I'm finally taking the plunge (lemmy.dbzer0.com)

submitted 4 months ago* (last edited 4 months ago) by mic_check_one_two@lemmy.dbzer0.com to c/homeassistant@lemmy.world

11 comments fedilink hide all child comments

Luckily I already have a Plex/Jellyfin server, so having a device running 24/7 isn’t an issue. But my experience is primarily on the HTPC side of things, so I’d appreciate any tips! I’m probably going to run it headless for now, but may eventually install a dashboard once the dust has settled on getting this running.

you are viewing a single comment's thread
view the rest of the comments

[-] HiTekRedNek@lemmy.world 1 points 4 months ago

He's using Sengled zigbee bulbs, probably with their hub. And needs an actual zigbee hub.

At least that's my understanding of his post.

this post was submitted on 30 Jul 2025

57 points (100.0% liked)

homeassistant

17011 readers

54 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world